North Star M157593E, Руководство пользователя

Страница: 57 / 62

Summary of Important Safety Information
57
o
When CONNECTING the battery, connect the RED cable to the POSITIVE terminal FIRST.
o
When DISCONNECTING the battery, disconnect the BLACK cable from the NEGATIVE terminal FIRST

Acid/skin contact. If battery acid contacts skin or clothing, flush immediately with water and neutralize with
baking soda.
Installation / Initial Set-up

Level, heat-resistant surface . Situate pressure washer on a firm, level, and heat-resistant surface with good
drainage. Ensure it sits level and will not slide or shift during operation. Block wheels to prevent movement.

Prevent carbon monoxide poisoning – Use outside only! Exhaust fumes from both the engine and the burner
contain carbon monoxide (CO), a poisonous gas you cannot see, smell, or taste. The CO generated by the
power washer can rapidly accumulate, even in areas that appear to be well ventilated, resulting in dangerous
and fatal concentrations within minutes. To prevent dangerous CO build-up:

ONLY use pressure washer outdoors and far away from open windows, doors, and building or vehicle
vents.

NEVER run pressure washer in an enclosed or partially enclosed location such as a building, garage,
shed, or vehicle. Running a fan or opening windows will not provide adequate ventilation to prevent
dangerous CO build-up.

Adequate ventilation . The pressure washer needs adequate, unobstructed flow of air to allow for proper
combustion and cooling. Situate so there is adequate clearance around pressure washer to allow for airflow –
at least 7' from any non-combustible wall or obstruction. Never place any objects against or on top of pressure
washer.

CO alarms . Ensure that working, battery-operated or battery back-up carbon monoxide alarms are used in
any dwelling/structure that is in close proximity to the running pressure washer.

Hot exhaust - fires . Exhausts from engine and burner can be extremely hot and cause fire. Position sprayer
so engine and burner exhausts are at least 7' away from combustible objects during operation.

Spark arrestor usage . Equip engine with a spark arrestor if pressure washer will be used near any ignitable
forest, brush, or grassy land. See the "Specifications" section of this manual to determine if your pressure
washer is already equipped. In such conditions, make sure you comply with applicable local, state and federal
codes.
Fuel Safety
Burner fuels are combustible at warm temperatures. You can be burned or seriously injured when handling fuel.
Using extreme care when handling fuel, including these preventative measures:

Fuel outdoors . Fill fuel tank outdoors – never indoors. Fuel vapors can ignite if they collect inside an
enclosure. Explosion can result.

Use approved container . Never pump fuel directly into fuel tank at gas station. Static charge can build and
ignite fuel. Use an UL approved fuel container to transfer fuel to the engine.

Running / hot engine . A hot engine or burner is hot enough to ignite fuel. Never add fuel or remove fuel cap
if engine or burner are running or still hot. Allow engine to cool at least two minutes before adding fuel.

Heat / flames / sparks . Stay away from sources of heat, flame, or sparks while adding fuel.

Don't overfill . DO NOT overfill the fuel tank. Allow at least 1/2" of empty space below the fill neck to allow
for fuel expansion.

Replace cap . Replace fuel cap securely before starting engine.

Spills . Clean up fuel spills immediately. Move pressure washer away from spilled fuel on the ground. Wipe
fuel off engine and wait 5 minutes for excess fuel to evaporate before starting engine. Fuel soaked rags should
be disposed of properly.

On skin / clothes . If fuel is spilled on your skin or clothes, change clothes and wash skin immediately.

Inspect fuel system . Check fuel tanks and fuel system on a regular basis. Look for signs of leaks,
deterioration, chafed or spongy fuel hose, loose or missing fuel hose clamps, or a damaged fuel tank. Do not
start pressure washer until needed repairs have been completed.

Fuel storage . Store fuel in a cool, dry place in an UL-approved, tightly sealed container.
Safety – Towing

Maintain trailer for safe operation. Follow all instructions to make sure the trailer is in good working
order and tires are fully inflated in order to prevent loss of control while towing.