North Star M110800F.4, Руководство пользователя

Страница: 48 / 72

48
Assembly Instructions
Step 6 – Suction Hose to Hydraulic Tank

Locate the shortest piece of suction hose and the appropriate sized
hose clamp as shown below.

Slide one end of the suction hose thru the inside hole of the engine
mount bracket.

Loosen hose clamp as necessary. Slide hose clamp onto end of suction
hose and push hose onto elbow.

Secure and tighten hose clamp around the suction hose and elbow.
Torque to50 in.-lb.

Hose clamp must have a tight seal to prevent hydraulic oil from
leaking.

Allow suction hose to hang loose until further direction.
Tools Needed

Flat Blade Screw
Driver

Torque Wrench
Tank to Hydraulic Pump Hose
Suction Hose, 14” x 3/4” ID
Qty 1, Model 110800 Only
Tank to Hydraulic Pump Hose
Suction Hose, 17.5” x 1” ID
Qty 1, Model 110900, 1131 Only
Suction Hose
Inside Hole of
Engine Mount Bracket
Elbow
(already installed)
Hose Clamp
Tow Bar
Tank to Pump Hose Clamp
Qty 1
110900 and 1131 Only
Tank to Pump Hose Clamp
Qty 1
110800 Only
Fasteners Needed from Parts Bag: Hoses Needed: