background image

 

70 

Limited Warranty 

 

Dear Valued Customer: 
 
The NorthStar Product you just purchased is built with the finest material and craftsmanship.  Use this product properly and enjoy the 
benefits from its high performance.  By purchasing a NorthStar product, you show a desire for quality and durability.  Like all mechanical 
equipment this unit requires a due amount of care.  Treat this unit like the high quality piece of machinery it is.  Neglect and improper 
handling may impair its performance.  Please thoroughly read the instructions and understand the operation before using your  product.  
Always contact NorthStar Product Support at 1-800-270-0810 prior to having any service or warranty work performed, as some services 
performed by parties other than NorthStar approved service centers may void this warranty.  This warranty is in lieu of any other warranty 
expressed or implied and NorthStar assumes no other responsibility or liability outside that expressed within this warranty. 

 

Limited Warranty 

NorthStar shall warranty any piece of equipment manufactured, or parts of equipment manufactured, to be free from defects in material or 
workmanship for a period of: 
 

NorthStar Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

110800, 110900, 1131 

4 years from date of purchase by user 

1 year from date of purchase by user  

 

Engine Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

110800, 110900, 1131 

3 years from date of purchase by user 

3 years from date of purchase by user  

 
“Consumer use” means personal residential household use by a consumer. “Commercial use” means all other uses, including use for 
commercial, income producing or rental purposes or when purchased by a business. 
 
This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the responsibility of the 
buyer), is non-transferable, and covers parts and labor.  Parts will be replaced or repaired at no charge, except when the equipment has failed 
due to lack of proper maintenance.  If a part is no longer available, the part may be replaced with a similar part of equal function.  Any 
misuse, abuse, alteration or improper installation or operations will void warranty.  Determining whether a part is to be replaced or repaired is 
the sole decision of NorthStar.  NorthStar will not provide for replacement of complete products due to defective parts.  Any costs incurred 
due to replacement or repair of items outside of a NorthStar approved facility is the responsibility of the buyer and not covered under 
warranty. Transportation costs to and from service center is the responsibility of the customer.   
 
In addition to the normal warranty, NorthStar shall warrant any normal wear item from defects in material or workmanship for a period of 90 
days from the date of purchase by user.  Normal wear items include, but are not limited to, tires and filter elements. 
 
This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts of God, 
applications not approved by NorthStar in writing, corrosion caused by chemicals, use of replacement parts which do not conform to 
manufacturer’s specifications, damage related to rodent and/or insect infestation and damage caused by vandalism.  Additional exclusions: 
loss of running time, inconvenience, loss of income, or loss of use, including any implied warranty of merchantability of fitness for a specific 
use.  Also, Outdoor Power Equipment needs periodic parts and service to perform well, and this warranty does not cover instances when 
normal use has exhausted the life of a component or the engine.   
 
This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part. Repair or replacement of 
parts does not extend the warranty period. 
 
The engine warranty is covered under the terms and conditions as outlined by the engine manufactures warranty contained herein and is the 
sole responsibility of the engine manufacture. Normal engine maintenance such as spark plugs, air filters, adjustments, fuel system cleaning 
and obstruction due to build up is not covered by this NorthStar warranty.   
 
Please fill in the following information and have it on hand when you call in on a warranty claim. 
 

Customer Number: ______________________________________________________________ 

 

Date of Purchase: _______________________________________________________________ 

 

NorthStar Serial Number: _________________________________________________________ 

 

Item Number: __________________________________________________________________ 

Содержание M110800F.4









































































Отзывы: