Nortel VoIP Gateway, Руководство по настройке

Страница: 70 / 220

70 Configuring the IP to Hunt Group Routing
P0606298 02
6
Repeat steps 4 and 5, for each IP to Hunt Group Routing Table entry.
7 Click the Submit button to save your changes.
8
To save the changes so they are available after a power fail, you must save the changes to
non-volatile memory. To save the changes to non-volatile memory:
a
Click the Save Configuration button.
The Save Configuration to the system screen appears.
b Click the Save Configuration button that is in middle of the screen.
A confirmation message appears when the save is complete.
Recommendations:
If the Norstar is using a PBX configuration (i.e.: physical lines are auto answer and
sets have target line appearances), we recommend that all lines be associated with the
same hunt group.
One option is to configure a range of valid extensions for a Hunt Group ID. For
example: 967-0100 to 967-0200 are a block of numbers assigned to target lines that
terminate on various Norstar sets. All four channels should be configured as part of
the same Hunt Group where the valid DN range is between 967-0100 and 967-0200.
If the Norstar is using a square configuration (i.e.: physical lines appear and ring on
Norstar sets), we recommend that each line that has its own DN should have a
dedicated Hunt Group that allows only the specific dialed DN access to that channel.
For example: Dedicated lines are assigned to four people: line 1 is 967-0100, Line 2 is
967-0101, line 3 is 967-0102, and line 4 is 967-0103. In this example, four hunt
groups should be defined. Each Hunt Group has a single dedicated DN associated with
the channel that corresponds to the Norstar line.
Note: The Save Configuration option is useful for trying out a new configuration.
Simply make the change and try out the new configuration. If you are happy with the
new configuration, save the changes to non-volatile memory. If you are not happy
with the new configuration, do not save the changes to non-volatile memory and
remove power from the VoIP Gateway. The VoIP Gateway will return to the previous
configuration.