manualshive.com logo in svg

Nortel VoIP Gateway, Руководство по настройке

Nortel VoIP Gateway - продукт для голосовой связи. Легкое настройка с помощью Configuration Manual. Бесплатное скачивание руководства в формате PDF, чтобы вы могли быстро начать использовать ваш Gateaway. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

100    Contents of the INI file

P0606298 02

IsFSOpenMediaOn
Connect

0 = Voice channel is open after sending an Alert message (default)
1 = Voice channel is opened after sending a Connect message
After receiving the Setup message, the VoIP Gateway can open a voice channel 
immediately, or it can wait until the call is answered and the Connect message is 
sent.
Note that this is only relevant if Fast Start or Tunneling are used.

IsFSMediaInfoSendOn
Connect

0 = Fast Start Structure response is sent in Alert message (default)
1 = Fast Start Structure response is sent in Connect message 
After receiving Fast Start Setup message, the VoIP Gateway should reply with 
H.225 message that includes media information structure. It can be sent with 
Alert or Connect messages. Sending this information in Alert message enables 
the remote side to open the voice channel before receiving the Connect 
message.
Note that this is only relevant if Fast Start is used.

IsFSRemoteRBTone

0 = Originator of Fast Start call plays local ringback tone, until it receives 
Connect message (default)
1 = If the received Alert message contains media information structure, the VoIP 
Gateway opens voice channel, without playing any local tone to the channel. It is 
the remote gateway’s responsibility to play the ringback tone over IP.
If the Alert message does not contain a media information structure, the voice 
channel is not opened and a local ringback tone is generated, until a Connect 
message is received.
Note that this is only relevant if Fast Start is used.

PlayRBTone2Tel

0 - Don't play for fast start

1 - Play

2 - Play according to Progress Indicator (PI). The gateway will not play local 
ringback tone if PI=1 or PI=8 was received in H.225 Alert message. (default)

PlayRBTone2IP

0 - Don't play Ringback to IP (default)

1 - Play Ringback tone to IP, and set PI=8 in H.225 Alert message

ProgressIndicator2IP

0 - No PI will be sent in H.225 messages
1 - PI = 1 will be sent to IP in H.225 Alert

8 - PI = 8 will be sent to IP in H.225 Alert

If not configured at all (default), the PI sent in the H.225 messages will be set 
according to "Play Ringback tone to IP" parameter.

CallerDisplayInfo#

Caller DisplayInfo table is used to send Caller Identification information per VoIP 
Gateway port to remote IP terminal.
This parameter can appear up to 4 times, with up to 18 characters per string.
To ensure proper display on the Norstar telephones, use a maximum of 16 
characters per string.

For example:
CallerDisplayInfo0 = Nortel 1001
CallerDisplayInfo1 = Nortel 1002 
CallerDisplayInfo2 = Nortel 1003;
CallerDisplayInfo3 = Nortel 1004

EnableCallerID

0 = Don’t send CallerID signal to VoIP Gateway port (default)

1 = Calling number and Display text is sent to the VoIP Gateway port, between 
the first and second rings.
In the VoIP Gateway, if "EnableCallerID=1", the Caller ID signal will be detected 
and sent to IP in a H.323 Setup message (as "Display" element).

H225ListenPort

H.225 TCP listen port (default 1720)
The VoIP Gateway expects to receive H.225/Setup message on this port

Table 16   H.323 Parameters (Continued)

INI File Field Name

Valid Range and Description

Содержание VoIP Gateway





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VoIP Gateway

MACROMEDIA COLFUSION MX 7 - INSTALLING AND USING COLDFUSION... Using Manual preview
COLFUSION MX 7 - INSTALLING AND USING COLDFUSION...
Бренд: MACROMEDIA Страницы: 72
Novell LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007 Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007
Бренд: Novell Страницы: 280
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Бренд: Netscape Страницы: 874
OCZ ATV-TURBO - WINDOWS 98 Installation Manual preview
ATV-TURBO - WINDOWS 98
Бренд: OCZ Страницы: 5
HP PROLIANT 56976839 Release Notes preview
PROLIANT 56976839
Бренд: HP Страницы: 16
HP ProLiant Power Interface Control Utility User Manual preview
ProLiant Power Interface Control Utility
Бренд: HP Страницы: 10
HP ProBook 6450b User Manual preview
ProBook 6450b
Бренд: HP Страницы: 181
HP ProLiant SL160s Installation Instructions Manual preview
ProLiant SL160s
Бренд: HP Страницы: 8
HP ProDesk 600 Maintenance And Service Manual preview
ProDesk 600
Бренд: HP Страницы: 245
HP ProBook 6445b - Notebook PC User Manual preview
ProBook 6445b - Notebook PC
Бренд: HP Страницы: 183
HP ProLiant Lights Out-100 User Manual preview
ProLiant Lights Out-100
Бренд: HP Страницы: 60
HP StorageWorks 2/64 - Core Switch Command Reference Manual preview
StorageWorks 2/64 - Core Switch
Бренд: HP Страницы: 830
HP StorageWorks 2/64 - Core Switch Installation Manual preview
StorageWorks 2/64 - Core Switch
Бренд: HP Страницы: 166
HP ProBook 6360b Maintenance And Service Manual preview
ProBook 6360b
Бренд: HP Страницы: 157
HP ProBook 6445b - Notebook PC Maintenance And Service Manual preview
ProBook 6445b - Notebook PC
Бренд: HP Страницы: 230
TC Electronic VSS3 Manual preview
VSS3
Бренд: TC Electronic Страницы: 22
Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual preview
CERTIFICATE SYSTEM 8.0 - ADMINISTRATION
Бренд: Red Hat Страницы: 564
Sonifex D:Scribe Standalone User Handbook Manual preview
D:Scribe Standalone
Бренд: Sonifex Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды