Saving to a file
55
Assigning a port
Standard 1.0
Network Administration Center
November 1998
User Guide Supplement
Assigning a port
Introduction
You can assign all of your printer ports, except one, to data
stream reporting. You must reserve one non-data stream printer
for use by the system.
Assigning a port
for data stream
reporting
To assign a port for data stream reporting, follow these steps.
Starting Point: NAC 2.5 maintenance console
Step Action
1
Verify that the NAC 2.5 system is shut down.
Note: For instructions on how to shut down the system, refer to
the Network Administration Center System Administration and
Maintenance Guide (NTP 553-4011-510), “Maintenance and
administration programs: system running” chapter.
2
Display the NAC Maintenance and Administration menu.
3
Select Configure NAC System.
Result: The Configure NAC System screen appears.
4
Select Port Assignment.
Result: The NAC Communication Port Assignment screen
appears.
5
Move the cursor to the port to be used for data stream
reporting.
6
Press PF2 to view a pop-up menu that lists the available
devices.
7
From the pop-up menu, select Data Stream.
Result: The entry appears in the Device field.
8
Ignore the Connect and Baud fields.
9
In the Name/Comment field, enter a name to indicate that this
port is assigned to data stream reporting.
10
Press PF1 to use the Commands menu to save and exit.
Содержание NAC
