Nortel NAC Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 132

Nortel NAC Скачать руководство пользователя страница 108

Configuring 10+ nodes

97

Configuring the nodes

Standard 1.0

Network Administration Center

November 1998

User Guide Supplement

3

From the Parameter Administration submenu, select Display
NACD-DN Selection.

Result: The Display NACD-DN Selection screen appears.

Note: For more information on this screen, refer to the Network
Administration Guide Supervisor’s User Guide (P0724352),
“Parameter Administration” chapter, “Display NACD-DN
Selection” section.

4

On the Display NACD-DN Selection screen, you must
reconfigure the node ACD-DN numbers, if necessary. The
node ACD-DN numbers should correspond to the node
numbers defined in “Defining the new node” on page 94.

Note: You must change any numbers that do not match on the
Display NACD-DN Selection screen.

5

From the Parameter Administration submenu, select Display
CDN Selection.

Result: The Display CDN Selection screen appears.

Note: For more information on this screen, refer to the Network
Administration Guide Supervisor’s User Guide (P0724352),
“Parameter Administration” chapter, “Display CDN Selection”
section.

6

On the Display CDN Selection screen, you must reconfigure
the node CDN numbers, if necessary. The node CDN numbers
should correspond to the node numbers defined in “Defining
the new node” on page 94.

Note: You must change any numbers that do not match on the
Display CDN Selection screen.

7

From the NAC main menu, select List Management.

Result: The List Management screen appears.

Note: For more information on this screen, refer to the Network
Administration Guide Supervisor’s User Guide (P0724352),
“List Management” chapter.

8

On the List Management screen, you must reconfigure the
ACD-DN, NACD-DN, and CDN lists, if necessary, to ensure
that they contain the correct node information.

Step Action

«
...
106
107
108
109
110
...
»

Содержание NAC





































































































































Отзывы:

Нет отзывов