106
Remote supervisor login
Configuring the Meridian MAX port
Standard 1.0
Network Administration Center
November 1998
User Guide Supplement
7
Press PF2 to view a pop-up menu that lists the available
devices.
8
From the pop-up menu, select Unknown Display.
Result: The entry appears in the Device field.
9
In the Connect field, press PF2 and select Modem.
Note: If you select Modem, you must also enter a value in the
Baud field.
10
In the Name/Comment field, enter the appropriate information,
if desired.
Note: This is the port you will use to connect the modem to the
Meridian MAX.
11
Press PF1 to display the Commands menu.
12
Select “Save changes and exit.”
13
Follow the steps described in the next procedure (“Configuring
the NAC port” on page 107) to continue the configuration
process.
Step Action
Содержание NAC
