Nortel Meridian SL-100 SE, Замена

Страница: 44 / 338

44 FSP card replacement procedures
555-4031-547 Standard 12.02 July 2002
NT0X91
in Meridian Cabinet Trunk Module—ISDN
(continued)
22 Press the power reset button on the power converter card and
simultaneously flip the circuit breaker associated with the shelf
to the ON position (up). The Converter Fail lights go off.
23 Pull the power converter Power Reset switch and then flip the
circuit breaker associated with the shelf to the ON position (up).
The Converter Fail lights go off.
At the MAP terminal:
24 RTS the C-side links for the PM unit you just busied using the
procedure Manually busying Series II PM and CPM C-side links
in this document. Complete the procedure and return to this
point.
25 Post the PM by typing
>PM;POST pm_type pm_no
and press the Enter key.
where
pm_type
is the type of PM (LTC-I or DTC-I)
pm_no
is the number of the PM
26 Load the PM by typing
>LOADPM UNIT unit_no CC
and press the Enter key.
where
unit_no
is the unit of PM (0 or 1)
27 Return the PM to service by typing
>RTS UNIT unit_no
and press the Enter key.
where
NT2X70AE/AF step 24
If the power converter is an Do