Nortel Meridian SL-100 SE, Замена

Страница: 112 / 338

112 IPE card replacement procedures
555-4031-547 Standard 12.02 July 2002
System cards
in an IPE module
(continued)
Replacing a system card in an IPE module
At your current location
1 Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
the procedure for verifying or accepting cards, or have been
directed to this procedure by your maintenance support group.
Before downloading firmware using the Optivity Telephony
manager, refer to CAB 75689 for important information.
Downloads to both the EXPEC controller cards and to a range of
M3900-series telephones DNs can be scheduled for any day
and any range of hours. It is not necessary to specify the end
time when scheduling. Once the start day and time have been
specified, the Optivity Telephony Manager for Meridian SL-100
will continue sequential downloads until all designated
downloads are complete. A log report is available at any time to
track download status.
2 Obtain a replacement card. Ensure that the replacement card
has the same product equipment code (PEC), including suffix,
as the card to be removed.
At the MAP terminal
3 Set the MAP terminal to the peripheral module (PM) level and
post the affected IPE by typing the following string:
>MAPCI;MTC;PM;POST IPE ipec_no shelf_no
and pressing the Enter key.
where
ipec_no
is the number of the IPE column (0-127).
DANGER
Module front and rear covers are not hinged
Module front and rear covers are not hinged; do not
let go of the cover. Lift the cover away from the
module, and set the cover out of the work area.