Nortel Meridian SL-100 SE, Замена

Страница: 180 / 338

MCRM-S card replacement procedures 180
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT6X69
in an MCRM-S RCC2
(continued)
Replacing an NT6X69 card in an MCRM-S RCC2
At your current location
1
Proceed only if you have been directed to this card replacement
procedure from a step in a maintenance procedure, are using
the procedure for verifying or accepting cards, or have been
directed to this procedure by your maintenance support group.
2
Obtain a replacement card. Ensure that the replacement card
has the same product engineering code (PEC), including suffix,
as the card to be removed.
At the MAP terminal
3 Set the MAP terminal to the peripheral module (PM) level and
post the RCC2 by typing the following string:
> MAPCI;MTC;PM;POST RCC2 rcc2_no
and pressing the Enter key.
where
CAUTION
Loss of subscriber service
Subscriber service may be lost in the active
unit when reseating the NT6X69 card.It is
recommended that this procedure be
performed during low traffic periods.
CAUTION
Loss of service
When replacing a card in the RCC2, ensure
that the unit in which you are replacing the
card is inactive and that the mate unit is
active.