Nortel Meridian SL-100 SE, Замена

Страница: 32 / 338

32 FSP card replacement procedures
555-4031-547 Standard 12.02 July 2002
perform the procedure. Instead, use it to preview what you will be doing
and to prepare. For example, if you see that the instructions will involve
another office, you will know to advise that office before you begin the
step-action instructions.
Step-action instructions
The step-action instructions tell you how to change a card. Normally,
you perform the steps in order, but you may be directed to return to a
previous step and repeat a sequence. The successful completion of a
step in a sequence may depend on previous steps; therefore always
perform the steps in the order specified.
While following the step-action instructions, you may be sent to the
“Common card replacement procedures” chapter of this book or to
another Nortel Networks technical publication (NTP) to perform a set of
instructions. If this happens, you will be told when to return to the
original instructions, and to which point in those instructions you should
go.
The step-action instructions provide the command syntax and machine
output you use or see while performing this procedure. For help on
DMS commands or output, see Commands Reference Manual,
297-1001-822.