Nortel CallPilot 150, Руководство по установке и обслуживанию

Страница: 55 / 94

Chapter 8 Backing up and restoring CallPilot 55
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
9
Click the Backup option.
10 In the Local Folder box, enter the path name of the directory on your computer in which you
want to store the CallPilot information.
11 In the CallPilot 150 hostname or IP addresses box, enter the host name or IP address of the
CallPilot Mini/CallPilot 150 you want to backup.
12 Click the OK button.
A confirmation dialog box appears.
13 If the information on the confirmation dialog is correct, click the Continue button.
If the information is not correct, click the Cancel button and repeat steps 10 to 12.
A dialog box appears when the backup is completed.
14
Click the Continue button.
Restoring the CallPilot information
If your CallPilot Mini/CallPilot 150 has been replaced or has lost its programming information,
you can restore the CallPilot programming, greetings and voice messages from a previous back up.
Note:
You must have a back up of the CallPilot information stored on your computer to
perform a restore.
You must install the CallPilot Backup and Restore Utility on the computer you are using to
restore the CallPilot information.
Caution:
Do not use CallPilot Manager to perform any administrative tasks while a
restore is in progress. If you use CallPilot Manager to make a change during a restore, the
CallPilot Mini/CallPilot 150 can become corrupted and inoperable.
To help prevent other people from making changes during a restore, inform anyone with
administrative privileges that you are doing a restore and that they should not access
CallPilot Manager until the restore is completed.
Note:
Check the Country and Language settings on the CallPilot Mini/CallPilot 150
before starting the Restore. The Country and Language settings must be the same as the
backup CallPilot information you are restoring.
If the Country setting is different than the backup, use CallPilot Manager to change the
language to match the backup CallPilot information. For information about how to change
the Country settings, refer to the CallPilot Manager Set Up and Operation Guide.
If the Language settings are different than the backup, use the Language Configuration
Utility to change the languages to match the backup CallPilot information. For
information about how to use the Language Configuration Utility, refer to
“Language
Configuration Utility” on page 47 .