Nortel CallPilot 150 Скачать руководство пользователя страница 37

Страница: 37 / 94

Chapter 5 Initializing the CallPilot Mini/CallPilot 150

CallPilot Mini/CallPilot 150 Installation and Maintenance Guide

Remove power from the CallPilot Mini/CallPilot 150.

Reconnect power to the CallPilot Mini/CallPilot 150.

The prompt

To change any of this, press any key within 5 seconds

appears.

Press the Enter key.

The prompt

(M)odify any of this or (C)ontinue?

appears.

Press the M key and press the Enter key.

The prompt

Do you want a LAN interface?

appears.

Press the Y key and press the Enter key.

The prompt

This board’s LAN IP Address (0.0.0.0 = RARP)

appears.

Type the IP address for the CallPilot Mini/CallPilot 150 in a valid dotted format and press the
Enter key.

The prompt

Subnet mask for LAN (0 for none)

appears.

Type the Subnet Mask for the CallPilot Mini/CallPilot 150 in a valid dotted format and press
the Enter key.

The prompt

Should there be a default gateway for packet routing?

appears.

If the CallPilot Mini/CallPilot 150 needs a next hop router, press the Y key and press the
Enter key.
If the CallPilot Mini/CallPilot 150 does not need a next hop router, press the N key, press the
Enter key and go to step 15.

The prompt

IP address of default gateway?

appears.

Type the IP address of the next hop router in a valid dotted format and press the Enter key.

Press the Enter key until the following prompt appears.

(M)odify any of this or (C)ontinue?

Press the C key and press the Enter key.

Connect the LAN cable to the Ethernet port on the CallPilot Mini/CallPilot 150.

You can now initialize the CallPilot parameters. For information about how to initialize the
CallPilot, refer to

“Running the Quick Install Wizard” on page 39

Note:

Steps 5 and 6 are used to force the CallPilot Mini/CallPilot 150 to reboot. You

can change the IP address only while the CallPilot Mini/CallPilot 150 is booting up.

Note:

It will take approximately one minute for this prompt to appear.

Note:

If you do not press a key within 5 seconds of this prompt appearing, repeat

steps 5 and 6.

Содержание CallPilot 150































































































Результаты поиска

Содержание CallPilot 150

Отзывы:

Бренды по названию

Популярные бренды

Nortel CallPilot 150, Руководство по установке и обслуживанию

Результаты поиска

Содержание CallPilot 150

Отзывы:

Бренды по названию

Популярные бренды