Nortel CallPilot 150, Руководство по установке и обслуживанию

Страница: 29 / 94

29
CallPilot Mini/CallPilot 150 Installation and Maintenance Guide
Chapter 5
Initializing the CallPilot Mini/CallPilot 150
After you install and power up the CallPilot Mini/CallPilot 150, you need to initialize it.
Initializing the CallPilot Mini/CallPilot 150 sets the system parameters to their default settings and
sets some global parameters. When the initialization is completed, the CallPilot Mini/CallPilot 150
is operational and ready for you to begin administration programming. Refer to
“Related
publications” on page 12 for a list of documents that provide information about administration
programming.
You initialize CallPilot Mini using CallPilot Manager.
You initialize CallPilot 150 using CallPilot Manager or a telephone.
About CallPilot Manager
CallPilot Manager is an application that you access from a web browser, such as Netscape
®
Communicator 1 or Microsoft ® Internet Explorer 2 . Nortel Networks recommends you use CallPilot
Manager whenever possible. CallPilot Manager provides access to administration programming
not available from a telephone.
To use CallPilot Manager, you must have a network connection to the CallPilot Mini/CallPilot 150
or an Ethernet crossover cable. If you are using CallPilot Manager to initialize CallPilot Mini/
CallPilot 150, refer to
“Initializing CallPilot Mini/CallPilot 150 using CallPilot Manager” on page
34 .
If you do not have a network connection or an Ethernet crossover cable, you can initialize the
CallPilot 150 using a two-line display telephone. If you are using a telephone to initialize CallPilot
150, refer to
“Initializing CallPilot 150 using a telephone” on page 43 . You cannot initialize the
CallPilot Mini using a telephone.
Note: Upgrading to CallPilot 150 from a previous voice messaging system.
If you are upgrading from a previous voice messaging system (for example, FlashTalk) to
CallPilot 150, you must remove the existing Feature Codes for the old voice messaging
system before you configure CallPilot 150. For information about how to remove the
existing Feature Codes, refer to
“To remove Feature Codes” on page 66 .
1 Netscape is a registered trademark and Communicator is a trademark of Netscape Communications
Corporation.
2 Microsoft and Windows are registered trademarks and Internet Explorer is a trademark of Microsoft
Corporation.
Note: The online Help for CallPilot Manager is best viewed in Internet Explorer.
There can be some page format inconsistencies if you use other browsers.