Nortel Agent Greeting NTVQ09AB, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 15 / 62

Agent Greeting Card Test and Debug Capabilities Page 21 of 66
Agent Greeting Card Maintenance and Troubleshooting Guide
Note: The security dongle is required for normal Agent Greeting Card
operation. A keycode is supplied during installation, which is matched to
the dongle, and authorises a number of channels for use.
The Agent Greeting Card reports a missing dongle during boot up via a
message on the serial connection. Once a dongle is inserted, the serial number
is reported during boot up.
On Media Card Agent Greeting (NTVQ09BA), if the internal RAM test,
ALU test, address mode test, boot ROM test, timer test or external RAM test
fails, the pack goes into a maintenance loop as no further processing is
possible. If a test fails, “F:XX” appears on the hex display for three seconds
after the “T:13” message, with the “XX” indicating the test that failed. For
example, if the 8051 co-processor test failed, “F:05” is displayed. IF more
than one test fails, the message indicates the first failure.
T:14 Programming CEMUX FPGA Booting IXP1200, waiting for
response from selftest
information.
T:15 Programming DSP FPGA Not used at present
T:16 Testing CEMUX interface Not used at present
T:17 Testing EEPROM Not used at present
T:18 Booting 486, waiting for response
with self test information Not used at present
T:19 Waiting for application start-up
message from 486 Not used at present
T:20 CardLAN enabled, waiting for
Request Config. Message Waiting for application start-up
message from IXP1200
T:21 CardLAN operational, A07
enabled, display now under host
control CardLAN enabled, waiting for
Request Config. Message
T:22 Not used at present CardLAN operational, A07
enabled, display now under host
control
Table 2: HEX Display codes during bootup
Display Code VPS (NTVQ09AB) Definition
Media Card (NTVQ09BA)
Definition