Securing your network
97
Parameters and variables
Description
use-radius-assigned-vlan
Allows use of Radius-assigned VLAN
value
non-eap-pwd-fmt { [ip-addr]
[mac-addr] [portnumber] }
Restores default format for RADIUS
non-EAPOL password attribute
eapol multihost command for a port
The
eapol multihost
command
controls the multihost settings for a specific port or for all ports on an
interface.
This command is executed in the Interface Configuration mode.
The syntax for the
eapol multihost
command is:
eapol multihost [allow-non-eap-enable][auto-non-eap-mhsa-e
nable][eap-mac-max {<1-32>}][enable][non-eap-map-max{<1-32
>}][radius-non-eap-enable][use-radius-assigned-vlan][port
{<portlist>}][non-eap-mac {H.H.H | port}]
"eapol multihost parameters and variables" (page 97)
describes the
parameters and variables for the
eapol multihost
command.
eapol multihost command parameters and variables
Parameters and variables
Description
allow-non-eap-enable
Enables MAC addresses of non-EAP
clients.
auto-non-eap-mhsa-enable
Enables auto-authentication of
non-EAP clients in MHSA mode
eap-mac-max {<1-32>}
Specifies the maximum number of
EAP-authenticated MAC addresses
allowed
enable
Allows EAP clients (MAC addresses)
non-eap-mac-max
Specifies the maximum number
of non-EAP authenticated MAC
addresses allowed
port
Displays port number on which to apply
EAPOL multihost settings
radius-non-eap-enable
Enables Radius authentication of
non-EAP clients
use-radius-assigned-vlan
Allows use of Radius-assigned VLAN
value
non-eap-mac {H.H.H | port}
Allows non-EAPoL MAC address
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
