84
Configuring Security using the CLI
The
mac-security security-list
command is executed in the Global
Configuration command mode.
Table 42 "mac-security security-list command parameters and values"
(page 84)
describes the parameters and variables for the
mac-security
security-list
command.
Table 42
mac-security security-list command parameters and variables
Parameters and
variables
Description
<1-32>
Enter the number of the security list that you want to use.
<portlist>
Enter a list or range of port numbers.
no mac-security command
The
no mac-security
command disables MAC source address-based
security. The syntax for the
no mac-security
command is:
no mac-security
The
no mac-security
command is executed in the Global Configuration
command mode.
The
no mac-security
command has no parameters or values.
no mac-security mac-address-table command
The
no mac-security mac-address-table
command clears
entries from the MAC address security table. The syntax for the
no
mac-security mac-address-table
command is:
no mac-security mac-address-table {address <H.H.H.> |port
<portlist>|security-list <1-32>}
The
no mac-security mac-address-table
command is executed in
the Global Configuration command mode.
Table 43 "no mac-security mac-address-table command parameters and
variables" (page 84)
describes the parameters and variables for the
no
mac-security mac-address-table
command.
Table 43
no mac-security mac-address-table command parameters and variables
Parameters and
variables
Description
address <H.H.H>
Enter the MAC address in the form of H.H.H.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
