Nortel 1700, Инструкция по установке

Страница: 58 / 94

58 Chapter 4 Installing option cards and DIMMs
314711-D Rev 00
Attaching the antistatic wrist strap
Nortel Networks ships the Contivity 1700 with an antistatic wrist strap. The
antistatic wrist strap directs the discharge of static electricity from your body to
the chassis of the gateway to avoid damage to sensitive electronic components.
You must wear an antistatic wrist strap on your arm whenever you remove, install,
or handle option cards and DIMMs.
To attach the antistatic wrist strap:
1 Locate the antistatic wrist strap and verify that the cable is attached to the
wrist strap.
2 Place the strap around your wrist and adjust it to ensure that the metal buckle
inside the strap touches your skin.
3
Insert the banana plug into the grounding jack at the rear of the chassis
(Figure 20) .
Figure 20 Location of the grounding jack for the antistatic wrist strap
Caution: Electrostatic discharge can damage hardware. Follow the
procedure in this section to protect your equipment from damage.
CS160002A
100-2240VAC
2-1A
50-60Hz
On/Off Reset
2
1
Serial
LAN
Grounding jack