Nortel 1700, Инструкция по установке

Страница: 55 / 94

Chapter 4 Installing option cards and DIMMs 55
Installing the Contivity 1700
Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
To remove the front bezel:
1 Shut down the Contivity 1700 using the Web GUI or the command line
interface and then unplug it as described in
“Shutting down the system to add
or replace hardware” on page 54 .
2 Using a screwdriver, turn each of the 2 screws on the front bezel a quarter turn
counterclockwise
(Figure 17) .
Figure 17 Removing the front bezel
3 Grip the two handles and firmly pull the bezel toward you to unsnap it from
the chassis.
Danger: Make sure to turn off the Contivity 1700 and unplug it before
you attempt to install an option card or DIMM.
Caution:
Do not use the piece with the Nortel Networks logo and the
LEDs as a handle.
CS160014A