Nortel 1000BASE-XD Скачать руководство пользователя страница 78

Страница: 78 / 100

Using the Passport 8100 Modules

B-2

204515-C

Table B-1.

LED Operation on the Passport 8190SM Module

Label

Color/State

Meaning

Link

Green/Steady

The management port is connected, and the link is
good.

Off

There is no link to the management port.

100

Green/Steady

The management port is operating at 100 Mb/s.

Off

The management port is operating at 10 Mb/s.

Utilization %
(8 LEDs)

Green

The number of lit LEDs indicates the level of CPU
activity.

Power Supply
1, 2, 3

Off

A power supply is not present in the specified
position, or the power supply in the specified
position is not turned on.

Green/Steady

The specified power supply is operating normally.

Amber/Steady

The specified power supply has a fault.

Fan 1, 2

Green/Steady

The specified fan is operating normally.

Amber/Steady

The specified fan has failed.

Temp

Green/Steady

The temperature is normal for switch operation.

Amber/Steady

The maximum operating temperature has been
exceeded.

Master

Off

The CPU subsystem on the module is performing
diagnostics.

Amber/Steady

The CPU subsystem is in a fault state.

Green/Blinking

This module is providing active CPU functions for
the switch.

Green/Steady

The CPU subsystem on this module is up and in
standby mode.

Online

Off

This LED is always off during operation of the
Passport 8190SM module.

Содержание 1000BASE-XD





































































































Результаты поиска

Содержание 1000BASE-XD

Отзывы:

Похожие инструкции для 1000BASE-XD

Бренды по названию

Популярные бренды

Nortel 1000BASE-XD, Инструкция по использованию

Результаты поиска

Содержание 1000BASE-XD

Отзывы:

Похожие инструкции для 1000BASE-XD

Бренды по названию

Популярные бренды