Page No 6 of 52 Reznor, Photon, Installation Manual, EN 2021-04, D301310 Iss 0
G
Health and safety
Ensure that anchoring points are suitable for
the weight and loading of the product and if
required, add suitable reinforcement to the
anchoring points area.
Due consideration should be taken for
workplace safety, risk assessments and waste
disposal.
Any modification of the product may be
hazardous and the manufacturer is not liable
for any damage or injury caused by improper
use.
Do not use this appliance if any part has been
immersed in water. Immediately call a qualified
service technician to inspect the appliance
and replace any gas control that has been
immersed in water.
This appliance is not intended for use by
persons (including children) with reduced
sensory or mental capabilities or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
Should overheating occur or the gas supply
fails to shut off, shut off the manual gas
valve to the appliance before shutting off the
electrical supply.
Gas-fired appliances are not designed for
use in hazardous atmospheres containing
flammable vapours or combustible dust,
in atmospheres containing chlorinated or
halogenated hydrocarbons or in applications
with airborne silicone substances.
This manual should be kept in a safe place for
future reference.
For your safety, if you smell gas:
• Do not try to light any
appliance
• Do not touch any electrical
switch, do not use any phone
in your building
• Evacuate all personnel
• Contact your gas supplier
immediately
Do not store or use petrol or other
flammable vapours and liquids in
the vicinity of the appliance.
Improper installation, adjustment,
alteration, service or maintenance
can cause property damage, injury
or death.
Read the installation, operation
and maintenance instructions
thoroughly before installing or
servicing this equipment.
Installation, assembly,
commissioning, service and
maintenance procedures must
be carried out only by suitably
competent qualified persons.
Unauthorised modifications to
the appliance, or departure from
the manufacturer’s guidance
on intended use, or installation
contrary to the manufacturer’s
recommendations may constitute
a hazard.
Use only factory authorised parts
and spares when replacement is
required.
In case of persistent problems,
contact your distributor.
