Multi Variable Heat Pump WALL Mounted Type Indoor Unit
4
3Installation Instruction
3.1 Installation clearances
Above
Sides
Below
Front
15cm (6 in.)
15cm (6 in.)
250 cm (8 ft.)
300 cm (10 ft.)
(1)
The unit shall be installed by the professional personnel according to this
installation manual.
(2)
Please contact a qualified contractor for installation. Manufacturer will not be responsible for any
malfunction caused by a unit that is not installed by a qualified contractor.
(3)
After installation, air conditioner should not be moved and reinstalled at another location. .
(4)
The appliance shall not be installed in a laundry room.
(5)
The indoor unit should be installed at least 2.3m (7.5 ft) above the floor.
3.2 Requirements for Communication Line
NOTICE! If the unit is installed in or near a strong electromagnetic field, shielded wire must
be used for the communication wire between indoor unit and controller. Twisted pair line
with shielding function must be unsed on the communication wire between indoor units
and indoor unit(s) to outdoor unit.
3.2.1 Select communication line for indoor unit and wired controller
Fig 3.2.1
Material type
Total length of
communication line
between indoor unit
and wired controller
L (m/feet)
Wire size (mm
2
/AWG)
Material
Standard
Remarks
