Multi Variable Heat Pump WALL Mounted Type Indoor Unit
2
(21) Be sure to use the appropriate accessories and parts to prevent the water leakage, electric shock and
fire .
(22) Make sure the unit can be grounded properly and securely to avoid electric shock. Please do not connect
the ground wire to gas pipe, water pipe, lightning rod or telephone line.
(23) Connect power to the unit 8 hours before operation. Do not cut off the power when it will not be used for a
short period of time, i.e. overnight (to protect the compressor).
(24) If refrigerant leakage occurs during installation, please ventilate immediately. Toxic gas will resuslt if the
refrigerant gas meets spark or open flame.
(25) Volatile liquid, such as paint thinner or gasoline will damage the unit appearance.Only use soft cloth with
a little mild detergent to clean the outer casing of unit.
(26) If anything abnormal occurs (such as burning smell), please power off the unit and cut off the main power
supply, and then immediately contact a licensed contractor. If the problem persists, the unit might be damaged
and lead to electric shock or fire.
(27) In standby status, the unit will use a little power for maintaining normal communication and preheating
refrigerant. if
the unit won’t be used for
an extended period of time, cut off the power of the complete unit. The
system will require power to be connected 8 hours before operation the next time it is used. .
Manufacturer will not assume responsibility for any personal injury or property loss caused
by improper installation, improper debugging, unnecessary repair, or not following the instructions
of this manual.
