Nortek Security & Control Gocontrol GC-TBZ48L, Руководство по установке и эксплуатации, Страница: 3 / 32

Copyright © 2017 Nortek Security & Control LLC 1
GC-TBZ48L
BATTERY POWERED Z-WAVE PLUS THERMOSTAT
INSTALLATION INSTRUCTIONS
The Z-Wave Plus Thermostat (GC-TBZ48L) is a programmable, Z-Wave communica ng
thermostat. It can be powered using 24VAC (if both “R”&”C”wires are available at the
thermostat), or using four (4) AA ba eries. Using Z-Wave technology, end users have the ability
to use most compa ble Z-Wave hubs/controllers to operate and animate the thermostat,
con
fi gure programming se ngs, as well as to display current condi ons in the home or o ffi ce.
Figure 1.
Z-Wave Thermostat Front View
MODE
FAN
Y
BATTERIES (4) PHILLIPS
SCREWS (2)
ANCHORS (2)
ADHESIVE WIRING LABELS SHEET
GC-TBZ48L THERMOSTAT
Features Include:
• A fi xed format display with white backlight
• Hea ng and cooling setup display op ons
• System mode (OFF, Heat, Cool, Auto,
E-Heat)
• Fan mode control and display (Auto, ON)
• Changeover type for Heat Pump (HP)
systems
• On-screen setup of HVAC type, Fan type
• F/C mode, and sensor calibra on
Compatible with 24 VAC gas, oil, or electric heating
and air conditioning systems; or gas millivolt heating
systems
DO NOT USE ON 120VAC SYSTEMS!
Standard Systems
• 1 Stage Hea ng and Cooling
• 2 Stage Hea ng and Cooling
Heat Pump Systems
• 1 Stage Hea ng and Cooling
• 2 Stage Hea ng and Cooling
• 2nd or 3rd Stage Aux Hea ng (Electric Heat
Strips
Box Contents
• 1 ─ Z-Wave PlusThermostat
• 1 ─ Sheet Adhesive Wiring Labels
• 2 ─ Plas c Wall Anchors
• 4 ─ AA Ba eries
Installation Outline
• Step 1 Remove Exis ng Thermostat
• Step 2 Install GC-TBZ48L Thermostat
• Step 3 Setup Thermostat to match System
Type
• Step 4 Install into Z-Wave Network