Norstar DR5, Руководство по установке

Страница: 259 / 534

Glossary 253
Park timeout:
The time before
an unanswered parked call is
routed back to the telephone
which parked it. Park timeout is
in Configuration programming.
See Call Park.
Password:
A password is a
specific sequence of digits that
you enter to gain access to
programming, to
override dialing restrictions, or
to use Remote Access with
DISA. Passwords are also
required for System Startup and
Administration programming.
See Class of Service password.
Pause:
A feature that enters a 1.5
second delay in a dialing
sequence on an external line.
This is often required for
signaling remote devices, such
as answering machines, or
when reaching through to PBX
features or Host systems. The
Pause symbol uses one of
the 24 spaces in a dialing
sequence. For Pulse Dialing,
inserts a 1.5 second pause into
the dialing sequence.
D i a l :
Two-digit codes (71-94) can be
programmed to dial external
telephone numbers. Personal
Speed Dial numbers are
programmed for each
telephone, and can be used
only at the telephone on which
they are programmed.
A telephone can be placed into
one of nine Call Pickup Groups.
A call ringing at a telephone
within a Pickup Group can be
picked up at any other
telephone within the same
Pickup Group. A telephone is
assigned to a Pickup Group in
Administration programming.
Pool:
See Line Pool.
Pre-dial:
A feature that allows
you to enter a number and
check it on your telephone
display before it is actually
dialed. If the number is
incorrect, you can edit it. The
number is dialed only when you
pick up the receiver or select a
line.
Prime line:
The line on your
telephone which is automatically
selected when you lift the
receiver, press the
Handsfree/Mute button or use
an external dialing feature. A
Prime Line is assigned to a
telephone in Configuration
programming.
Prime Set (Prime Telephone):
A telephone which provides
backup answering for incoming
calls on external lines. The
Prime Telephone for will
ring for any unanswered calls
on that line. A Prime Telephone
is assigned to a line in
Configuration programming.
Modular DR5 Installer Guide