Norstar DR5, Руководство по установке

Страница: 246 / 534

240 Glossary
One telephone can have up to
buttons. An Answer
button is automatically assigned
to a telephone when that
telephone is assigned an
Answer DN.
Answer DN:
The Directory
Number (DN) of a telephone
that is monitored by an Answer
button. Up to four Answer
can be assigned to a telephone.
This is done in Configuration
programming.
A feature that determines what
the system does with new Call
Log items when your Call Log is
full. When Autobumping is ON,
a new log entry causes the
oldest entry to be deleted. If
Autobumping is OFF, your
system does not log
calls when your log is full.
button:
A memory
button which, if programmed,
provides one-touch dialing of
external or internal numbers.
A feature that allows vou to
select the type of calls that are
stored in your Call Log. You can
choose to log calls that were not
answered by anyone within the
system, to log calls that were
unanswered at this telephone
but answered elsewhere in the
system, to log all calls answered
and not answered at this
telephone, or to not have calls
automatically logged.
Automatic Dial:
A feature that
allows you to dial without having
to pick up the receiver or select
a line. You must have a prime
line to use Automatic Dial.
Automatic Handsfree:
A
feature which automatically
activates Handsfree operation
when you make or answer a
call. Automatic Handsfree is
assigned in Administration
programming.
Automatic Hold:
A feature
which automatically places an
active call on hold when you
select another line. Automatic
Hold is programmed in
Configuration programming.
Automatic Privacy: See
Privacy.
Automatic Telephone
Relocation:
A feature which
lets a telephone retain its
personal and system
programming when it is plugged
into a different modular
jack. Automatic telephone
relocation is enabled in
Configuration programming.
Auxiliary ringer:
A separate
external telephone ringer or bell
which can be programmed to
ring when a line or a telephone
rings. An auxiliary ringer may be
programmed to ring only when
the system is in a particular
service mode. Programming
an auxiliary ringer is done in
Administration programming
after the feature has been
enabled in Configuration
programming.
of
Modular Installer Guide