Norstar DR5, Руководство по установке

Страница: 256 / 534

250 Glossary
Line abilities:
In Administration
programming, the heading
under which you assign Line
Filters, Remote Filters, and
Remote Access Packages to
lines.
Line filter:
See Dialing filter.
Lihe names:
In Administration
programming, this sub-heading
allows you to assign names to
external lines.
Line number:
A number which
identifies an external line. The
total number of lines depends
on how many Trunk Modules
are installed.
A group of lines used for making
external calls. Line Pools
provide an efficient way of
giving a telephone access to
external lines without taking up
many line buttons. A line is
assigned to be a member of a
Line Pool in Configuration
programming.
Line Profile:
A feature you can
use to review the settings that
have been programmed to lines
in Configuration and
Administration programming.
The settings cannot be changed
with this feature. Line profile is
available only on the
and M7324 telephones.
Line Redirection:
A feature which allows you to
redirect all calls on an incoming
line to a destination outside the
system. Once a line is
redirected it cannot be
answered within the
system. The system may be set
up to give a brief ring when a
call comes in on a redirected
line. This feature differs from
Call Forward in two ways. It
redirects only external calls (not
internal calls) and it redirects
calls to destinations outside the
system. Call forward redirects
calls only to destinations inside
the system. See Call
Forward and Redirect Ring. To
cancel Line Redirection. enter
If your system is
connected to a Private Branch
Exchange (PBX), you can use a
Link signal to access special
features. The Link signal can
also be included as part of a
longer stored sequence on an
External button or in a
Speed Dial code. The Link
symbol uses two of the 24
spaces in a dialing sequence.
Loait:
lets you manually log call
information when you
connected to a call.
Modular Installer Guide