Norland Connect-Chek CC6000, Руководство пользователя

Страница: 39 / 109

39
2.4
Your Norland Automated Interferometer requires minimal maintenance. In the event
that it proves necessary to move your unit to another location or to ship it to another
facility, use the following guidelines to prevent damage to your Norland system.
Cleaning the CPU, Monitor, and Interferometer
Use a damp, lint free cloth to clean the outer housing of the interferometer. If any dust
or dirt has collected on the mount, remove the mount from the mount base on the
microscope and use compressed air to blow off particles. If any dust or dirt has collected
on the mount base, wipe off dirt with a lint free wipe. An alcohol wipe can be used on the
mount base and mounts if excessively dirty.
NOTE: Do not attempt to clean the internal parts of the microscope unit. Use of a dust cover when
the unit is not in use will prevent foreign particles from collecting on the equipment and will make
maintenance of the system much easier.
Repacking Unit For Shipment
If the interferometer needs to be repacked for moving or shipping, it is very important
that it is packed as it was received. Follow the Shipping Kit Instructions.
NOTE: Norland Products strongly recommends that the original shipping containers be saved for
future transportation needs.
MAINTENANCE