1 | General information
NORIS Automation GmbH
4 / 23
Instruction Manual VD61
General information
Use for intended purpose
▪ The product may only be used for the applications specified in this
document and in the technical documentation. Transportation with due
care and attention, correct storage and installation as well as careful
use and maintenance during operation of the product must be ensured
to guarantee trouble-free and safe operation.
▪ The product must be used at all times in agreement with the technical
specifications. In particular, compliance with the ambient conditions
recommended in the technical documentation must be ensured.
Installation, assembly, repair and maintenance work
▪ Observe the relevant national regulations and observe the applicable
standards and directives for special applications.
▪ Installation, assembly, repair and maintenance work must be carried
out exactly according to the installation and maintenance instructions
applicable to the individual products in order to guarantee their func-
tional reliability and avoid installation errors and damage.
▪ Installation, assembly, repair and maintenance work must only be per
-
formed by qualified and authorised technical personnel in accordance
with the relevant documentation, especially the safety and warning in-
formation contained therein.
▪ Make sure that no excess parts (screws, tools, etc) are left behind in
or on products after performing installation, assembly, repair or main-
tenance work. Non-compliance with this requirement may cause mal-
functions and/or damage to the products or the system.
▪ Make sure a function test is carried out on completion of installation,
assembly, repair and maintenance work to ensure trouble-free opera-
tion of the products.
Suitable tools and equipment
Only suitable tools and equipment, especially materials provided by NO
-
RIS, are to be used for installation, assembly, repair and maintenance
work. Damaged products or components are to be replaced only by genu-
ine NORIS components or parts. NORIS shall accept no liability whatsoev
-
er for any damage incurred as the result of using unauthorised spare parts.
This will invalidate the warranty. Keep the operating instructions in a place
that is accessible to all users at any time.
Modification of products
NORIS shall accept no liability whatsoever if unauthorised modifications
have been made to the products. This will also invalidate the warranty.
Therefore, consult our technical staff before undertaking any modifications.
1
