NORIS Automation GmbH
Installation and commissioning | 5
Instruction Manual VD61
17 / 23
2:
VD61-10 pressure connection
A. Connect the pressure connection appropriately to the pressure
transmitter.
➩
Use an open-ended spanner to counter the screw connection.
Therefore, use the nut of the pressure transmitter (see previ
-
ous fig) and not the transmitter housing.
➩
When screwing, do not cross the threads.
➩
If you use an attenuator or an adapter, screw it between the
pressure transmitter and the pressure connection. Pay atten-
tion that you also use the nut of the pressure transmitter for
countering. The screw connection must be seal and fixed
properly.
Avoid improper installation!
Otherwise the pressure transmitter can be damaged.
NOTICE
