Nordson Versa-Spray II, Руководство пользователя по изделию

Страница: 11 / 64

Description
2-3
Part 107016-02
E
2016 Nordson Corporation
Gun Air Upgrade Kits
Five kits are available to add a diffuser and nozzle extension to a
Versa-Spray II automatic powder spray gun. For spray guns used with a
Versa-Spray II control unit, the following kits are available.
S
Diffuser kit
S
Nozzle extension kit
S
Diffuser and nozzle extension kit
For spray guns used with a Versa-Spray I control unit, the following kits are
available.
S
Manifold kit
S
Diffuser kit
S
Nozzle extension kit
Purge Adapter
The purge adapter is used to clean accumulated powder from the powder
inlet body and nozzle. It is installed in the powder inlet body in place of the
hose adapter. The powder feed hose connects directly to the purge
adapter.
In-Line Ball Mount Kits
The spray guns are shipped with the Nordson Shur-Lok gun mount shown
in Figure 2-1. This mount can be replaced with an optional in-line ball
mount, or a combination in-line ball mount and ion collector.
Ion Collector Kits
The ion collector can improve the smoothness and appearance of cured
powder coatings. It collects ions emitted from the spray gun’s charging
electrode instead of allowing them to deposit on the part. This can reduce
the rate of charge buildup in the powder deposited on the part, which may
reduce defects in the cured coating such as pinholing and orange peel.
Three kits are available: two retrofit kits for spray guns with Shur-Lok
mounts or in-line ball mounts, and a combination in-line ball mount and ion
collector kit. Installation and adjustment instructions are included with each
kit.