Rhino
R
VE Bulk Unloaders, 125-mm Frame
18
Part 1608271-04
E
2019 Nordson Corporation
Install a Follower Module
Use the following procedures to install a follower module.
WARNING:
Personnel performing these procedures must know how to
safely operate the unloader elevator controls.
Block the Air Cylinders
1. Using the elevator controls, raise the elevator until there is enough
space between the unloader base (4) and the hydraulic section (3) to
install the follower module.
2. Insert two support blocks (1) onto each air cylinder (2) to prevent the air
cylinders from drifting downward.