¡
Filling Dispensing Barrels
¿
Fill barrel, leaving required empty space as shown on Barrel Fill Level
chart below.
¡
Insert piston. A piston must always be used when operating the
DispensGun.
¬
Put on the blue tip cap and blue end cap to provide an airtight
storage seal.
You may be using prepackaged barrels supplied by your distributor.
Nordson EFD packages several fluids, including solder mask, thermal
heat sink compound, solder paste and grease. Call +1-401-431-7000
for more information on these packaged fluids.
NOTE:
Red pistons are recommended for use with the DispensGun.
Warning
If a dispensing tip becomes clogged, do not attempt to clear it by forcing
the trigger. This may damage the DispensGun or tip. Replace the
clogged tip.
Barrel Fill Level
3cc 1.3 cm
0.5"
5cc 1.9 cm
0.75"
10cc 1.9 cm
0.75"
30cc 1.9 cm
0.75"
55cc 1.9 cm
0.75"
¬
3
¿
1 10/9/12 4:39 PM Page 3