«
∆
5
∆
You are now ready to dispense. Squeeze the trigger gently until fluid flows.
You control the amount. When trigger is released, dispensing stops.
«
When finished, remove empty barrel and discard. Barrels that are not empty
can be sealed with tip caps for future use.
For best results:
Hold the DispensGun with the tip at a 45° angle in contact
with the work surface. Use the Test Sheet to practice dots and stripes.
Note:
To ensure no-drip performance, the drive rod retracts after each deposit
to relieve pressure on the piston. After several deposits, advance the drive rod by
pushing the black knob forward, then continue dispensing.
Cleaning the DispensGun
Inspect the drive plunger and wipe clean if necessary. Clean the gun surfaces
with household or other mild, nonabrasive cleaners. Do not use solvents.
NOTE:
EFD components are recyclable. Check with your
local authorities concerning dispense residue.
45°
1 10/9/12 4:39 PM Page 5
