Nordson Coolwave 610, Руководство пользователя по изделию

Страница: 6 / 44

Safety
1-2
Part 1074165A02
E 2010 Nordson Corporation
Qualified Personnel
Equipment owners are responsible for making sure
that Nordson equipment is installed, operated, and
serviced by qualified personnel. Qualified
personnel are those employees or contractors who
are trained to safely perform their assigned tasks.
They are familiar with all relevant safety rules and
regulations and are physically capable of
performing their assigned tasks.
Intended Use
Nordson ultraviolet (UV) equipment is intended
specifically for integration into other machines and
should NOT be operated as a standalone system
or without appropriate safety guarding, shielding,
and interlocks. It is the responsibility of the
integrator and end user to ensure that the final
assembly fulfills all necessary legislation and is
completely safe before operation.
This equipment is designed for the accelerated
curing of UV inks, adhesives, and coatings. Do not
use this equipment to cure alternative materials
unless approved by the material supplier.
The equipment is not flame or explosion proof and
is not designed for use in hazardous areas.
Use of Nordson equipment in ways other than
those described in the documentation supplied with
the equipment may result in injury to persons or
damage to property.
Some examples of unintended use of equipment
include:
S
using incompatible materials
S
making unauthorized modifications
S
removing or bypassing safety guards, shielding,
or interlocks
S
using incompatible or damaged parts
S
using unapproved auxiliary equipment
S
operating equipment in excess of maximum
ratings
S
using equipment in hazardous areas
Regulations and
Approvals
Make sure all equipment is rated and approved for
the environment in which it is used. Any approvals
obtained for Nordson equipment will be voided if
instructions for installation, operation, and service
are not followed.
Currently there are two organizations that set
recommended guidelines for exposure to
occupational microwave radiation exposure, OSHA
(U.S. Department of labor, Occupational Safety and
Health Administration − Directive 29cfr 1910.97)
and ANSI (American National Standards Institute −
Directive C95.1 − 1982). The ANSI directive, which
is more stringent and most commonly referred to,
states that individuals should not be exposed to
microwave radiation levels above 5 mW/cm
2
at
2.45 GHz on a continuous basis.