Nordson Coolwave 610, Руководство пользователя по изделию

Страница: 11 / 44

Safety
1-7
Part 1074165A02
E 2010 Nordson Corporation
Safety Precautions While
Servicing
A qualified competent electrician must carry out all
electrical maintenance and servicing of this
equipment.
WARNING: This equipment operates at
high voltages up to 5000 volts dc and is
therefore potentially dangerous. The
electrician servicing this equipment must
take all precautions.
WARNING: Isolate the equipment at the
main, disconnect or lockout before
removing any of the cover panels
Control System Cleaning
Keep all contactors and relays clean and free from
dirt and dust. Check these regularly, particularly in
extremely dusty or powder-charged working rooms.
High Voltage Connections
Check the high voltage connections within the
equipment carefully to make sure that these do not
become dirty or coated with powder or other
possible conducting material. Clean them regularly,
at least whenever the lamp is changed, possibly
more often where a particularly heavily polluted
atmosphere occurs.
Always make sure the unicable connectors are
secure and tight before applying power.
Cabinet Cooling
Check the cabinet cooling fan at least weekly and
keep clear of any material that might clog or stop its
operation. The power supplies run warm and
keeping them cool with proper ventilation will
prolong their life.
Disposal
Dispose of equipment and materials used in
operation and servicing according to local codes.
Moving and Storage
Moving or storing of the Nordson UV curing system
must comply with all applicable local and state
regulations. All electrical power and other services
must be disconnected and the lamp head must be
cool before moving or storing this equipment.
Power supplies should be properly attached or
fastened to an appropriate fixture such as a pallet
for handling and storing. Due to the power supply’s
weight, it is recommended a mechanical device be
used for handling and they should be kept as low to
the floor as possible. It is recommended that the
bulb be removed from the lamp head and stored or
shipped in the original shipping tube. The lamp
head and power supply should be shipped and or
stored in the original container or an equivalent and
kept dry and clean at all times.
Shipping of Nordson UV curing systems and their
component parts must be done in accordance with
all applicable shipping regulations including
requirements for shipping of magnetic materials
and mercury lamps.
Safety Symbols
The following safety symbols are used in this
manual. The symbols are used along with
warnings to help you operate and maintain your
equipment safely. Pay attention to all warnings and
follow directions to avoid personal injury.
WARNING: Mechanical or combined
mechanical/electrical hazards.
WARNING: Electrical hazard
WARNING: Ultra violet light hazard
WARNING: Burn hazard
CAUTION: Equipment hazard