manualshive.com logo in svg

Nordson EFD PICO Touch Series, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD PICO Touch Series Скачать руководство пользователя страница 47

PICO 

Toµch

 Series Controllers

47

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Part Numbers

Standard 

Toµch

 Controller

NOTE: 

Refer to “

Toµch

 XP Controller Part Number” on page 75 for the 

Toµch

 XP 

controller part number.

Part #

Description

7361217

PICO 

Toµch

 controller

Routine Shutdown

1.  Stop the process.

2.  De-pressurize the system.

WARNING

Risk of burns. Wear heat-protective gloves when working with a heated valve. 

3.  If the valve is heated, switch OFF heater control.

4.  Refer to the valve manual to perform any of the following procedures as appropriate for the fluid:

•  Removing the fluid body assembly.
•  Purging the valve with the process fluid.
•  Purging the valve with cleaning fluid.
•  Cleaning the valve fluid paths.

Operation (continued)

Valve Extension Cables (Standard 

Toµch

 Controller)

NOTE: 

The 

Toµch

 XP controller requires different extension cables from the standard 

Toµch

 controller. Refer to 

“

Toµch

 XP Valve Extension Cables” on page 75 for the 

Toµch

 XP controller extension cables.

Risk of equipment damage. The standard 

Toµch

 controller does not accept extension cables designed for the 

Toµch

 XP controller.

CAUTION

Do not exceed the maximum extension cable length of 9 m (30 ft). Doing so will adversely affect communication 
between the valve and the controller.

CAUTION

Part #

Description

Comment

7362085

0.6 m (2.0 ft) valve extension cable set

Includes one each for power and 
communication

7361298

2 m (6.6 ft) valve extension cable set

7361299

6 m (19.7 ft) valve extension cable set

7361300

9 m (29.5 ft) valve extension cable set

Содержание PICO Touch Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды