manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD 2+2-XCH-V3 Скачать руководство пользователя страница 64

PROFIBUS Communicator Setup

Applicability of this Section

This section provides only the additional information required to set up a PICO controller with the PROFIBUS 
communicator expansion. Refer to “Setup” on page 16 for all other setup information.

Parameterization of the PICO Controller Via the PROFIBUS 

Communicator

Organization of the Bus System/Parameterization 

•  The default baud rate on the CAN bus between the PROFIBUS communicator and the PICO controller is 

125 kBit/s.

•  The default setting for the PICO controller CAN address is 63. The System Data/CAN menu option in the PICO 

controller displays this. Changing the value is NOT possible. The Nordson EFD PROFIBUS communicator 
communicates exclusively with this CAN address.

•  The default setting for the communicator CAN address is 1.
•  All parameters that can be changed via TXT/SD card can be modified via the PROFIBUS communicator. An 

exception is the code protection defined by the TXT file.

•  The PICO controller occupies, respectively, 8 bytes of input data and 8 bytes of output data in the process image 

on the PROFIBUS communicator. The parameterization of the PICO controller is sequentially written and read via 
the process image.

•  The 8 data bytes of the defined protocol are converted 1:1 into the cyclic process image of the PROFIBUS 

communicator.

•  Dispensing processes can also be started and stopped via the process image. To start, all 99 lines can be 

addressed. In the process, the bus runtimes must be considered.

•  The process image cannot be used to query the status and error messages that were interchanged between the 

PICO controller and the PICO 

Toµch

 controller.

PICO Controller 2+2-XCH-V3

64

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Содержание 2+2-XCH-V3





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды