manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD 2+2-XCH-V3 Скачать руководство пользователя страница 59

Inspect Kit Components

After unpacking the equipment, check that the scope of delivery is complete and that your operating conditions 
comply with the information on the rating plate.
Refer to “Unpack and Inspect” on page 12 for the components shipped with all PICO controllers. The PICO 
controller V3 kit includes the following additional components:

•  One Nordson EFD PROFIBUS communicator (P/N 7029246)
•  One SD card containing the S7 PROFIBUS project and GSD file
•  One 24 V, 2 m power supply cable for the PROFIBUS communicator (P/N 7830499)
•  One 0.5-m terminated CAN cable for connecting the PICO controller to the PROFIBUS communicator (P/N 7029237)

PROFIBUS Communicator Installation

Make the System Connections

Prior to conducting work on the system, ensure that running processes will not be interrupted. If necessary, turn off 
the system. Only qualified and trained personnel may perform work on the system.

CAUTION

1.  Turn off devices/systems/processes to avoid interrupting running processes.

2.  Create the connection between the PLC (e. g., the SIEMENS S7-PLC) and the PROFIBUS communicator. 

3.  Create the PROFIBUS termination on the first and last plug of the PROFIBUS strand (refer to “Installation 

Examples” later in this section as needed.)

4.  Create the CAN connection between the PROFIBUS communicator and the PICO controller (cable 

P/N 7029237). If using a customer-supplied CAN cable, create the CAN termination. CAN cable P/N 7029237 is 
already terminated). Refer to “Connector Pin Assignments and Signal Levels” later in this section for connection 
details.

5.  If necessary, follow these steps to reset the PROFIBUS communicator address (in this example, the address is 

set to 63):

a.  Carefully remove the protective cover without touching the circuit board or other components.
b.  Turn rotary switch B to 6 and rotary switch A to 3.

NOTE: By default, the PROFIBUS communicator is set to address 22. The S7 project described in the operating 
manual and provided with the system on the SD card functions with address 22 for the communicator. The address 
cannot be changed during operation. That means that the communicator requires a power OFF/ON reset for each 
change so that the change can be applied. Refer to the PICO 

Toµch

 controller operating manual to connect the 

valve(s) to the PICO 

Toµch

 controller.

6.  Create a hardwire connection between the PLC, the PICO controller, and the PICO 

Toµch

 controller 

(Y-connection cable, P/Ns 7028222 and 7012975). Refer to “Connector Pin Assignments and Signal Levels” on 
page 13 and to “PROFIBUS Interface D-Subconnector Pins” on page 63 for connection details.

7.  Establish the power supplies to the PLC, the PROFIBUS communicator (cable P/N 7830499), the 

PICO controller (cable P/N 7027455), and the PICO 

Toµch

 controller (refer to the PICO 

Toµch

 controller 

operating manual if needed).

PICO Controller 2+2-XCH-V3

59

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Содержание 2+2-XCH-V3





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды