![NordicTrack NTL29010.0 Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/nordictrack/ntl29010-0/ntl29010-0_manual_1703517026.webp)
26
TROUBLESHOOTING
Most incline trainer problems can be solved by following the steps below. Find the symptom that applies,
and follow the steps listed. If further assistance is needed, please see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION:
a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor
is plugged into a properly grounded outlet (see page 13). Use only a single-outlet surge suppres-
sor that meets all of the specifications described on page 13.
IMPORTANT: The incline trainer
is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the power switch located on the incline trainer
frame near the power cord. If the switch protrudes as
shown, the switch has tripped. To reset the switch,
wait for five minutes and then press the switch back
in.
PROBLEM: The power turns off during use
SOLUTION:
a. Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes
and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the incline trainer still will not run, please see the front cover of this manual.
PROBLEM: The console displays remain lit when you remove the key from the console
SOLUTION:
a. The console features a display demo mode, designed to be used if the incline trainer is displayed
in a store. If the screen remains lit when you remove the key, the demo mode is turned on. To
turn off the demo mode, see step 4 on page 23.
PROBLEM: The incline of the incline trainer does not change correctly
SOLUTION:
a. Recalibrate the incline system. See step 3 on page 24.
PROBLEM: The iFit Live mode is not functioning correctly
SOLUTION:
a. If the iFit Live mode is not functioning correctly, make sure that the incline trainer has the most
current firmware available (see step 7 on page 24).
Tripped
Reset
c