NordicTrack 831.24992.2 Скачать руководство пользователя

Страница: 7 / 36

Make sure that the power cord is unplugged.

Place a piece of cardboard below the rear of the

Frame (56) to protect the floor or carpet.

Attach the Left Wheel Cap (96) to the Base (97)

with two #8 x 3/4" Screws (1).

Attach the Right Wheel Cap (not shown) to

the right side of the Base (97) in the same

way.

Cardboard

2. Pull the Upright Wire (84) and the Base Ground

Wire (94) through the indicated hole in the Base

(97).

Attach the Base Ground Wire (94) to the Base

(97) with a #8 x 1/2" Ground Screw (9).

Hole

ASSEMBLY

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials.

Do not dispose of the pack-

ing materials until you finish assembly.

• The underside of the walking belt is coated with

high-performance lubricant. After shipping, there

may be some lubricant on top of the walking belt

or on the shipping carton. This is normal.

If there

is lubricant on top of the walking belt, wipe it

off with a soft cloth and a mild, non-abrasive

cleaner.

• To identify small parts, see page 6.

• Assembly requires the following tools:

the included hex key

one adjustable wrench

one Phillips screwdriver

To avoid damaging parts, do not use power

tools for assembly.

Содержание 831.24992.2





































Результаты поиска

Содержание 831.24992.2

Отзывы:

Похожие инструкции для 831.24992.2

Бренды по названию

Популярные бренды

NordicTrack 831.24992.2, Руководство пользователя

Результаты поиска

Содержание 831.24992.2

Отзывы:

Похожие инструкции для 831.24992.2

Бренды по названию

Популярные бренды