11
10.
IMPORTANT: See page 14 and plug in the
power cord. Next, see page 16 and turn on
the power.
Then, press the 0 percent Incline button.
When the frame stops moving, remove the
key from the console and unplug the power
cord.
10
IMPORTANT:
Make sure to follow all
instructions in this step.
9. Firmly tighten the four 3/8" x 2 3/4" Screws (7)
first and then tighten the four 3/8" x 1 1/4"
Screws (8) (only one side is shown).
Press the Left and Right Base Covers (92, 93)
onto the Base (97) until they snap into place.
9
93
8
92
97
7
11. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11).
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (11). Note: It may
be necessary to move the Frame back and forth
to align the Storage Latch with the Base (97).
11
53
11
Large
Barrel
56
6
Latch
Knob
11
3
97
