NordicTrack 831.24992.2 Скачать руководство пользователя

Страница: 26 / 36

Lower the treadmill (see HOW TO LOWER THE

TREADMILL FOR USE on page 24). Remove the

three #8 x 3/4" Screws (1). Carefully pivot the

Motor Hood (71) off.

Locate the Reed Switch (52) and the Magnet (50)

on the left side of the Pulley (49). Turn the Pulley

until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet

and the Reed Switch is about 1/8 in. (3 mm).

necessary, loosen #8 x 3/4" Tek Screw (13), move

the Reed Switch slightly, and then retighten the

Screw. Reattach the Motor Hood (not shown) with

the five #8 x 3/4" Screws (not shown) and run the

treadmill for a few minutes to check for a correct

speed reading.

SYMPTOM: The incline of the treadmill does not

change correctly

a. Hold down the Stop button and the Speed increase

button, insert the key into the console, and then re-

lease the Stop button and the Speed increase but-

ton. Press the Stop button and then press the

Incline increase or decrease button. The treadmill

will automatically rise to the maximum incline level

and then return to the minimum level. This will recal-

ibrate the incline system. If the incline does not cali-

brate, press the Stop button again, and then press

the Incline increase or decrease button again.

When the incline is calibrated, remove the key from

the console.

SYMPTOM: The walking belt slows when walked on

a. Use only a single-outlet surge suppressor that

meets all of the specifications described on page 14.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

come damaged. Remove the key and

UNPLUG

THE POWER CORD.

Using the hex key, turn both

idler roller screws counterclockwise, 1/4 of a turn.

When the walking belt is properly tightened, you

should be able to lift each edge of the walking belt

2 to 3 in. (5 to 7 cm) off the walking platform. Be

careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and run the

treadmill for a few minutes. Repeat until the walk-

ing belt is properly tightened.

c. If the walking belt still slows when walked on, see

the front cover of this manual.

Top

View

1/8 in.

Idler Roller Screws

2–3 in.

Содержание 831.24992.2





































Результаты поиска

Содержание 831.24992.2

Отзывы:

Похожие инструкции для 831.24992.2

Бренды по названию

Популярные бренды

NordicTrack 831.24992.2, Руководство пользователя

Результаты поиска

Содержание 831.24992.2

Отзывы:

Похожие инструкции для 831.24992.2

Бренды по названию

Популярные бренды