norbar PNEUTORQUE PTME-72-1000, Руководство оператора

Страница: 5 / 15

PAGE 3 OF 13
ISSUE 1
02 2006
INTRODUCTION
The Pneutorque
®
52mm series are air driven power tools designed for applying torque to wheel nuts in
the range of 200 N.m to 1000 N.m This tool uses the air pressure set on an external pressure regulator to
determine the stall torque.
PARTS INCLUDED:- ____________________________________________________________
PART NUMBER DESCRIPTION QUANTITY
180**.*06 Pneutorque® 1
18747 Lifting Bracket 1
34305 Operators Handbook 1
ACCESSORIES / SPARES:- _____________________________________________________
PART NUMBER DESCRIPTION
16036 Lubro Control Unit
18591 Silencer
26287 Spring Pin for drive shaft.
77112.2 Drive Shaft (3/4”)
FEATURES AND FUNCTIONS
REPLACEABLE DRIVE SHAFT
All tools are fitted with a ” (19mm) drive shaft that can easily be replaced.
TRIGGER
The trigger controls the flow of air. The more the trigger is pressed the more air flows into the tool. This
allows for slow positioning of socket and reaction plate. Once positioning is complete, the trigger must be
fully depressed for correct torque application.
CLOCKWISE / COUNTER-CLOCKWISE SELECTOR
Tools fitted with this option can be used for releasing bolts as well as tightening. The gearing inside the
housing is biased towards counter-clockwise drive to give a higher torque for releasing the fastener.
LIFTING BRACKET
The metal lifting bracket can be used to suspend the tool from a balancer.