norbar PNEUTORQUE PTME-72-1000, Руководство оператора

Страница: 4 / 15

PAGE 2 OF 13
ISSUE 1
02 2006
SAFETY
IMPORTANT: DO NOT OPERATE THE TOOL BEFORE READING THIS HANDBOOK. FAILURE TO
DO SO MAY RESULT IN PERSONAL INJURY OR DAMAGE TO THE TOOL.
This tool is intended for use with threaded fasteners. Any other use is not recommended.
The use of ear protectors is recommended.
Do not use tool in potentially explosive atmosphere as these tools contain grease, which may cause an
explosion hazard in the presence of pure oxygen. These tools also contain aluminium alloy components
which may cause a hazard in certain explosive environments.
Be aware of unexpected tool movement due to reaction forces as this may cause injuries. Failure of the
drive shaft may also cause unexpected tool movement.
Isolate the tool from all energy sources before changing or adjusting the drive square or socket.
There is a risk of crushing between the reaction foot and work piece.
Keep hands away from reaction foot.
Keep hands away from tool output.
Keep loose clothing, hair, etc. from being caught in any rotating part of the tool.
Ensure all hoses are correctly fitted before switching on the mains air supply. This avoids the risk of injury
by whipping air hoses.
Use only sockets and adaptors which are in good condition and are intended for use with power tools.
Pneutorque® Wrenches are non impacting, torque controlled bolt tightening tools and must always be
operated with the following:-
•
Clean dry air supply with a minimum flow of 19 litres/sec (40 CFM).
• Air Regulator and optional Lubricator Unit 1/2” Bore (12 mm).
• Impact or high quality sockets.
•
Reaction Arm.