65
1).Your TV does not support all possible video output resolutions.
Go to the settings menu of your Player and select "HDMI Auto " under
the menu item "TV system ". Your Player will try to automatically select
the best possible video output resolution for your TV.
2).In some rare cases it is possible that not all options supported by the
TV are selectable. This problem can occur when the TV is switched on
from its standby mode, regardless of the current operating status of the
PLAYER
In order to be able to select all video output resolutions supported by
your TV, disconnect your Player from the power supply and reconnect
it after a few seconds. Now all available video output resolutions are
shown in the settings menu.
Q: Why can't I hear any sound on my television when I connect it via
HDMI?
A: This problem may have several causes. Please check the following
items:
An audio output format that is not supported by your television is
selected. The volume is to low / Mute is active. Please select the
correct digital output mode in the Setup Menu. Go to the audio settings
menu and select the menu entry "Digital-Audio-Out " and choose the
option "HDMI LPCM/RAW" if your television set does not support real
surround sound. You can also refer to the Audio Settings.
Q: Why mustn't I disconnect the Player from the mains supply without
having switched if off beforehand?
A: The loading or saving of the current system settings takes approx. 10
seconds when the Player is turned on or off. If the player is disconnected
