46
your product needs to connect. This description is for operations under
WINDOWS XP system, and operations under other WINDOWS
operating systems are similar to this.
Select “My Computer” in the desktop, choose “Management” by
clicking right key on the mouse to enter the computer management
interface. Double click “Service and Application” to enter the program.
Select “Service” and enter.
Double click “Wireless Zero Configuration” in the last third one of the
“Service” options to enter its window of attribute. Then select “Startup”
in the routine options of the window, and click “OK”, thus the wireless
network function of the computer is opened.
If your computer configures with internal wireless network card (such
as most of notebook PCs) and has started the wireless network
function, it can search out the product’s SSID and connect with the
product. If your computer doesn’t have internal wireless network card
(such as most of desktops), you can insert a USB wireless network
card that supports 802.11 protocol into the computer’s USB interface
and install drive for the network card. You should inactivate wired
network of the computer before configuring the wireless network.
Then there will be an icon representing wireless network and showing
in the status bar in the bottom right corner of the computer’s desktop.
Click the icon, and a status window of the wireless network connection
will show. Click “Check the Wireless Network”, then wireless network
SSID within the searching scope will be shown on the interface.
Select the product’s SSID and the computer’s Ad Hoc connection icon
in the window of wireless network connection, and click “Connect”.
There will be a clue to indicate that the connection is successful if the
