Nonin CO-Pilot H500, Руководство оператора

Страница: 63 / 68

57
Technical Information
Power Requirements (Mains): 100–240 VAC 50–60 Hz
Internal Power:
D-HH Battery:
SP-BLE Battery:
3.8 volt Li-ion battery, 3600 mAh
3.7 volt Li-ion battery, 1260 mAh
Battery Capacity*: Approximately 10 hours continuous operation
*From a fully charged new battery measuring SpO2,
PR, COHb, and MetHb.
Battery Capacity Following
Storage:
Standby State for 1 Week:
Off State for 1 Month:
Approximately 4 hours continuous operation*
Approximately 8 hours continuous operation*
*From a fully charged new battery measuring SpO2,
PR, COHb, and MetHb.
D-HH Charging Time*:
SP-BLE Charging Time*:
Approximately 3 hours
Approximately 9 hours
*From critical battery level
a. This information is especially useful for clinicians performing photodynamic
therapy.
b. The system will operate for a minimum of 20 minutes when exposed to the
extreme environmental operating conditions.
Dimensions:
D-HH: 97 mm W x 178 mm H x 21 mm D
3.8 in. W x 7.0 in. H x 0.8 in. D
SP-BLE: 23 mm H x 28 mm W x 89 mm L
0.9 in. H x 1.1 in. W x 3.5 in. L
Weight:
D-HH: 330 grams (11.6 ounces)
SP-BLE: 90 grams (3.2 ounces)
Warranty:
D-HH Display, SP-BLE Signal
Processor: 2 years
Battery: 1 year