Nomadix Access Gateway, Руководство пользователя

Страница: 165 / 392

A
CCESS
G
ATEWAY
System Administration 153
2.
System administrators can set the properties for each room from the subscriber side of the
Access Gateway. The system automatically detects which port number the administrator is
using and allows them to enter the fields for the room corresponding to the port they are
using.
If required, click on the check box for In Room Port Mapping to enable this feature.
3. If you enabled In Room Port Mapping , you must assign a Username and Password . You
will need these when you perform port mapping from the subscriber side of the Access
Gateway.
Go to “In Room Port Mapping” on page 155 to map rooms from the subscriber side of the
Access Gateway.
4.
Select
No Port Location Mapping
if you are not using Port-based access.
5.
If you are using an access concentration device that cannot handle VLAN IDs, select one
of the available
Access Concentrator Query options:

Tut Systems Expresso

Lucent DSL Terminator

Tut MDU Lite Systems

RFC1493 Compliant Systems

RiverDelta 1000B

Elastic Networks
For security reasons, this feature should be disabled when in room port mapping
(from the subscriber side of the Access Gateway) is completed.
The devices in the following list must be assigned an IP address on the same
subnet as the Access Gateway. You must remove “old” concentrator types before
entering new ones.